Detail TRACKER 280 SERIES Digital Panel Indicator For Frequency, Timing, Counting, Batching, Rate, Measurement And Display
Tracker 280 Specification
Display
Type: 14.2mm high brightness red LED ( green option)
Range: 6 digit ( -199999 to 999999)
Resolution: Selectable for real time and totalled values
Update rate: 2, 4 or 10 per second ( programmable)
- Also dependant on input rate ( timer modes)
Inputs
Two inputs, each configurable for: AC magnetic pickup, contact closure,
TTL logic and ( NPN/ PNP)
Measurement: Up to 150Khz
Time base/ measurement accuracy: Better than 100ppm
Pulse/ frequency: User scaling for both channels. Adjustable gate time.
Isolated to all other inputs and outputs except for the status inputs and
excitation supplies. Not isolated between input channels
User linearisation: 8 point per channel, for frequency and timing modes
Transducer Supplies
5 or 12VDC up to 100mA. Not isolated to the signal inputs
Measurement Modes
Count ( 6 or 12 digit) and totalisation, up / down and quadrature count,
dependent on the phase or state of channel B. Frequency and timing
measurement with integrated totalisation. Scaling to engineering units for
all modes ( e.g. Pulse rate to rpm, time period to mph or kph etc.) .
Maths Functions
Pre-set, Tare or Zero ( programmable) , Max/ Min memory, Ch1 - Ch2,
Ch1+ Ch2, count up/ down, Elapsed Time, Totalise Time, Average Times,
Jakarta - Indonesia
Phone : 021-29563045 ( hunting)
Hp : 08156141954
Pin BB : 284152F7
Tampilkan Lebih Banyak