Detail Kistler Type 9461, 9461sp Preloading Elements
The standardized preloading elements are used for mounting the quartz force sensors Types 9251A, 9252A, 9601A with internal diameter of 8.1 mm.
A set of preloading elements consists of a preloading bolt, a screw nut, a centering sleeve, a sliding washer and two insulating washers. The preloading set Type 9461 allows for a very compact mounting of dynamometers. A minimum overall height is obtained by recessed mounting of the ring nut.
For technical specifications, please refer to the PDF below.
Jakarta - Indonesia
Phone : 021-29563045 ( hunting)
Hp : 08156141954
Pin BB : 284152F7
Tampilkan Lebih Banyak