Detail Kistler Type 9455 Preloading Elements
The standardized preloading elements are used for mounting the multicomponent force sensors Types 907X with internal diameter of 40.5 mm.
A set of preloading elements consists of a hollow preloading bolt, a screw nut, a centering sleeve and a sliding washer. The preloading set Type 9455A allows for a very compact mounting of dynamometers. A minimum overall height is obtained by recessed mounting of the ring nut. The preloading force plate can be fastened to a mounting frame with M16-screws.
Jakarta - Indonesia
Phone : 021-29563045 ( hunting)
Hp : 08156141954
Pin BB : 284152F7
Tampilkan Lebih Banyak
